Specifications
General | |
Manufacturer | Insteon |
Manufacturer Product No. | 2475DA2 - (Each) 2475DA2-5PK - (5-Pack) |
UPC | 813922011432 - (Each) 810026640469 - (5-Pack) |
Patent No. | U.S. Patent No. 7,345,998. Protected under U.S. and foreign patents (see www.insteon.com) |
Safety Approval(s) |
FCC 15.107, 15.109, 15.249 RSS 210 EN 300 220-2, 301 489-3 AS/NZS 4268, CISPR 22 UL 508 CSA C22.2#14 IEC 60669-2-1 |
FCC ID | SBP2475DA2 |
Warranty | 2 Years |
Insteon Features | |
Insteon ID | 1 |
Operation Modes | 400 responder groups and 1 controller group |
Maximum Scene Memberships | 400 (Combined Controller + Responder) |
Insteon Device Category | 0x01 Dimmable Lighting Control (All Frequencies) |
Insteon Device Subcategory | 2475DA2 (915MHz | 0x25 |
Status LED | Green when load is on, red when load is off |
Local On-Level (Dimming Mode) | Adjustable, 32 fixed brightness levels or resume dim |
Local Ramp-Rate (Dimming Mode) | Adjustable from 0.1 seconds to 9 seconds locally (0.1 seconds to 9 minutes via software) |
Local Control | Yes |
Commands Supported as Controller | On |
Commands Supported as Responder | On | Off Fast On | Fast Off Begin Bright | Being Dim End Bright | End Dim Incremental Bright | Incremental Dim |
Software Configurable | Yes |
RF Range | 150 ft. (depending on your home’s construction) |
Phase Detect Beacon | Yea |
Mechanical | |
Mounting | Behind switch or outlet, or above light fixture in a single-gang electrical box |
Wire's | Analog + 0-10V Control (Gray wire) Analog - 0-10V Control (purple wire) Line Neutral Load 1 Load 2 |
Set Button | 1 |
Beeper | Yes |
Beep On Button Press | Optional (off by default) |
LED | 1, Green/Red |
Set Button | Yes |
Plastic | UV stabilized polycarbonate |
Beeper | Yes |
Dimensions | 171mm (wide), 30mm (high), 35mm (deep) 6.75-in. (wide), 1.2-in. (high), 1.4-in. (deep) |
Weight | 5.1oz |
Operating Environment | Indoors |
Operating Temperature Range | 32° F to 104° F (0° C to 40° C) |
Operating Humidity Range | 0-90% relative humidity |
Storage Conditions | -4° F to +158° F (-20° C to 70° C) |
Case Color | White |
Plastic | UV stabilized polycarbonate |
Electrical | |
Voltage | 100-277VAC ± 10% |
Frequency | 50Hz/60Hz |
Maximum Load | 0-10VDC for connection to dimmable ballast Load 1; 100 to 277VAC / 5Amps Load 2; 100 to 277VAC / 5Amps |
Hardwired Remote Control | RJ-10 Mini-modular jack four conductor |
Hardwire Port Wiring | Pin 4 (Left side) | Pin 3 | Pin 2 | Pin 1 (Right side) Ground | Group 1-2 | Group 3-4 | 12-15VDC |
Hardwire Port Triggering | Group 1: triggers when switch between Pin 3 & 4 is closed Group 2: triggers when switch between Pin 3 & 4 is opened Group 3: triggers when switch between Pin 2 & 4 is closed Group 4: triggers when switch between Pin 2 & 4 is opened |
Retains All Settings Without Power | Yes, saved in non-volatile EEPROM |
Load Type(s) | Wired in ballasted dimming and non-dimming lighting loads |
Standby power consumption | < 1 Watt |