Insteon Serial Modem Interface

InsteonSKU: 2413S
Best Seller



The Serial Insteon PowerLinc Modem is a serial-based home automation interface that allows PC- and hardware-based automation controllers to control Insteon -compatible lights, appliances, heating/air conditioning systems and alarm systems directly via the Insteon network. This home automation interface uses simple RS-232 commands, allowing any device with a programmable serial port to send Insteon commands easily, making controllers such as SimpleHomeNet's and Universal Devices' IP bridges instantly Insteon compatible. The dual-band interface sends and receives both powerline and radio frequency (RF) Insteon signals, so it doubles as an Access Point. This makes it ideal for new Insteon installs and if have or plan to use an RF-only Insteon -compatible remote, thermostat, motion sensor and contact sensor. The RF signal can bypass electrical noise or attenuation near the PC and it pulls many of the "distant" Insteon devices one hop closer, which can expand the size of potential installations into even larger homes and commercial buildings.

New features:

  • Built-in Dual-Band with RF function, acts like an Access Point for phase bridging and RF to/from power line
  • 1,000+ links (compared to around 1000+ links previously)
  • Added a beep sounder
  • Red/Green LED light
  • Supports faster reading and writing of the PLM's database by another controller
  • Much lighter weight
  • No pass-through outlet

Please Note: The controller connected to the Serial Insteon PowerLinc Modem must remain powered on and running the controller program connected to the controller or host at all times of usage. Additionally, the dual-band interface does not supply power to external devices.

Compatible Software/Controllers

  • ISY-994i
  • Houselinc
  • PowerHome2
  • Smartenit Utility Suite

If using with HouseLinc

If you intend on using this with HouseLinc software please note the following:

  • HouseLinc software has been discontinued and is no longer supported
    • To use this PLM with HouseLinc you must first download and update the HouseLinc Definitions file.
    • No technical support provided for HouseLinc – we recommend reaching out to the Smarthome Forum community.

Other PowerLinc Options:

PowerLinc Modem - Insteon USB Interface (Dual-Band)

Ideal for Developer Use

Hardware developers with products that include RS232 ports can use the Serial Insteon PowerLinc Modem to send and receive Insteon communications. This relieves developers from embedding Insteon chips inside their devices and provides a quick way to market without having to go through electronics re-designs or costly safety agency approvals. It also provides electronic TTL lines for direct connection to systems with embedded processors.

Please note that developing application and controls for the PLM is not for the casual home automation enthusiast. Due to the nature of this product, Smarthome's technical support staff cannot offer programming support for developers. We cannot assist in the troubleshooting or development of applications and/or code.

If you are interested in developing software for the PowerLinc or for more information about becoming an Insteon developer please click here.

Advanced support for Insteon developers is sold separately.

Manufacturer Insteon
Manufacturer Product No. 2413S
UPC 718122390717
Patent No. U.S. Patent No. 7,345,998. Protected under U.S. and foreign patents (see
Certification Safety tested for use in USA and Canada (ETL #3017581)
Software Sold Separately
Status LED Green/Red LED
Warranty 2 Years
Operation Modes Insteon
Connector Type RJ-45
Interface RS-232 & TTL
Baud Rate 19,200 Kbps
Insteon Features
Insteon Addresses 1 hard-coded out of 16,777,216 possible
Insteon Links 1,000+
Insteon Device Category 0x03 (Network Bridges)
Insteon Device Sub-Category 0x11
Insteon Power Line Frequency 131.65 KHz
Insteon Minimum Transmit Level 3.2 Vpp into 5 Ohms
Insteon Minimum Receive Level 10 mV
Insteon Messages Repeated Yes
Operating Conditions Indoors, 32 to 104° F, up to 85% relative humidity
Dimensions (H x W x D) 3.9" x 2.6" x 1.5"
Weight 4.0 oz
Voltage 120 Volts AC +/- 20%, 60 Hertz, single phase
Pass-Through Outlet No
Power Consumption 1.68 Watts
  • 1x - Insteon Serial Modem
  • 1x - Quick Start Guide
  • 1x - DB-9 Serial Cable - for connecting to a computer

Payment & Security

Amazon American Express Apple Pay Discover Facebook Pay Google Pay Mastercard PayPal Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed